Dusker logo
Dusker logo

All articles

How to use the Self TimerUpdated 7 months ago

To activate or deactivate the timer feature, all you need to do is double-tap the power button on the device.

If using Sleepbar v2.0:
The Sleepbar V2.0's built in timer lets you choose between 30, 60 and 90 minutes. 
With the device powered on, simply double tap the power button to enable 30 minute timer. 
You'll hear a short beep to confirm this has been activated.
To activate the 60 minute timer, just double tap it again. You'll hear 2 beeps to confirm this has been activated.
To activate the 90 minute timer, double tap it again. You'll hear 5 beeps.. just kidding.. 3 beeps, to confirm this has been activated. 
When you double tap it again, it will revert back to the 30 minute timer, with the single beep to confirm. 

You can also control the timer from within the Dusker Audio App.
In your Dashboard, you'll see a "Timer Mode" Screen Setting.

Simply tap this, and set the desired shutdown time. 



If using Sleepbar v1.0:

To enable the 30 minute timer mode, simply double tap the power button while the device is powered on. 

Was this article helpful?
Yes
No